PARK 758.2 Cutter 1.5" for HTR1/HTR1B

OUR PRICE £349.99

Offer £306.00

*€353.14 approx

**Available 4-5 days usually

Specifications

Enquire

Options	1.5 inches Bronze Low stock available for click and collect (2 - 3 days)
Description	758.2 - Cutter & Reamer, 1.5" headsets for HTR-1 & HTR-1B The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface Standard The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer Must also be used with the 750 Centering Cone Adapter to ensure correct alignment 1.9516"" (49.57mm) diameter reamer/2.441"" (62mm) facer Bores a machined surface to a depth of approximately 25mm and then faces the end of the headtube SHIS terminology: The 758.2 is for EC49 upper and lower headtubes Use with generous quantities of Park CF-2 cutting fluid for best results and prolonged tool life

Options

1.5 inches Bronze Low stock available for click and collect (2 - 3 days)

Description

758.2 - Cutter & Reamer, 1.5" headsets for HTR-1 & HTR-1B

The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface Standard
The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer
Must also be used with the 750 Centering Cone Adapter to ensure correct alignment
1.9516"" (49.57mm) diameter reamer/2.441"" (62mm) facer
Bores a machined surface to a depth of approximately 25mm and then faces the end of the headtube
SHIS terminology: The 758.2 is for EC49 upper and lower headtubes
Use with generous quantities of Park CF-2 cutting fluid for best results and prolonged tool life

As with any product, specification is subject to change without prior notification. You are advised to confirm current specification before buying.