Halo Rear Fix-G Track Hub 24H
*subject to status, minimum spend applies
Click here for full details.
See our finance info page for details
- Classic Credit 36 Months 15.9% on most orders where the goods total is £415.00 or more
- Classic Credit 24 Months 15.9% on most orders where the goods total is £415.00 or more
- Classic Credit 12 months 9.9% on most orders where the goods total is £415.00 or more
- Interest Free Finance (18 Months) on most orders where the goods total is £2000.00 or more
- Interest Free Finance (12 Months) on most orders where the goods total is £1000.00 or more
- Interest Free Finance (6 Months) on most orders where the goods total is £415.00 or more
Representative example
Representative example
Representative example
Options | 24H Black Low stock available for click and collect (2 - 3 days) |
---|---|
Description | An ever present headache with traditional fixed hubs is the assembly of a drive sprocket that is attached by a thread being pulled in both directions by the pedal torque. The usual solution to avoiding the sprocket unwinding itself from the hub is a left-hand threaded lock-ring, butted up tight against the sprocket. But, as many riders have found out, this system can be quite volatile. ...and the solution - an HG splined hub body, with sprockets that slide on and an independent lockring that never has to handle rotational forces from the drive. Halo Fix-G advantages:
"Halo's HG spline system is so obvious and brilliant that other brands must be kicking themselves for not thinking of it first. It can't slip or thread; it's way easier to fit or swap and will take down to 12t cogs, it's genius". Note: The HG spline must ONLY be used with 7mm wide "fat foot" sprockets such as Halo Fat Foot sprockets or Gusset Double Six sprocket to avoid the cog biting into the alloy splines on the hub. Regular width HG sprockets should NEVER be used. Weights noted for track hubs include tracknuts at 32g |